© 2010 The University of Nottingham       ISBN 978-1-907284-60-1
 

Authors

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z
 

A         (top)

Abanda, Henry An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon
Abanda, Henry Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction
Abbas, Ali Numerical modeling of fibre-reinforced concrete
Abd Rahman, Norashidah The face bending behaviour of concrete filled structural hollow sections
Abdalla, Jamal A. Energy-based predictions of number of reversals to fatigue failure of steel bars using artificial neural network
Abdel-Magid, Hisham I.M. Hydrologic analysis of digital elevation models using archydro extension
Abdullah, A A Abang Coupling parallel buildings by supplemental viscous damper device
Abido, Mohammad Multiobjective evolutionary finance-based scheduling: the entire projects' portfolio
Abolghasemzadeh, Puyan BIM-based immersive indoor graph networks for emergency situations in buildings
Abu-Dagga, Khader Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates
Adamo-Villani , Nicoletta Virtual Reality for learning construction surveying
Agdas, Duzgun Parametric modeling in transportation construction
Agdas, Duzgun IT in transportation construction: opportunities and barriers to implementation
Ahangar-Asr, Alireza Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model
Ahangar-Asr, Alireza An evolutionary numerical approach to modelling the mechanical properties of rubber concrete
Ahmad AL-Hadad, Botan A genetic algorithm approach to highway alignment development
Ahmad AL-Hadad, Botan Using genetic algorithms to assist in the design of a water distribution network
Ahmed, Ammar Model-based estimation of rooms’ energy consumption in building with renewable energy sources
Ahmed, Ammar Building performance analysis based on modelling and simulation
Ahn, Changbum Enhanced estimation of air emissions from construction operations based on discrete-event simulation
Ahn, Seungjun Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM
Ai, Chengbo Simulating port logistics operations using 3D visualization technology
Ailland, Karin A daily significant data basis for construction process simulation
Akcamete, Asli Potential utilization of building information models for planning maintenance activities
Akcamete, Asli Analysis of three indoor localization technologies to support facility management field activities
Akcay, Caner A model-based and RFID integrated approach to streamline component information flow in construction projects
Akin, Omer A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing
Akin, Omer Requirements for a computerized approach to plan sensor placement in the HVAC systems
Akinci, Burcu Potential utilization of building information models for planning maintenance activities
Akinci, Burcu A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing
Akinci, Burcu Evaluation of toolkits for visualizing information about performance of earthwork activities on a construction job site
Akinci, Burcu Requirements for a computerized approach to plan sensor placement in the HVAC systems
Akinci, Burcu An approach for fusing data from multiple sources to support construction productivity monitoring
Akinci, Burcu Analysis of three indoor localization technologies to support facility management field activities
Akula, Manu Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Akyildiz, Sercan Development of network-level linear programming optimization for pavement maintenance programming
AL Qady, Mohammed Contractual document process model for document management
Al-Bazi, Ammar Simulation modelling and multi-layer genetic algorithms to identify optimal crew allocation in the precast industry.
Al-enezi, Mohammad Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure
Al-Hussein, Mohamed Automation in drafting and design for modular construction manufacturing utilizing 2D CAD and parametric modeling
Al-Jabri, Khalifa A new formulation for rotation of bare-steel joints at elevated temperatures using genetic programming
Al-jibouri, Saad A process-based framework for modelling risk-related failure costs in construction
Al-jibouri, Saad A computer model for assessing project risks and occurrence of failure costs
Al-jibouri, Saad Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives
AlBahnasi, Homam Improving construction safety through real-time motion planning of cranes
Alel, M Gains and losses of information when collaborating remotely over a network communication in the construction industry
Allan, Luke Using artificial intelligence to deliver optimised energy consumption
Almansour, H.H. Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques
Alshawi, Mustafa Achieving IT-based sustainable competitive advantage in construction: organisational soft issues
Alshawi, Mustafa Strategic positioning of IT in construction: the way forward
Alwisy, Aladdin Automation in drafting and design for modular construction manufacturing utilizing 2D CAD and parametric modeling
Aly, Mohamed A simplified model for the interactive generation of architectural space layout
Amor, Robert Technical challenges for integrated design and delivery solutions in civil and building engineering
Ang, Kok Keng Buckling of defective carbon nanotube
Annisimov, Yuri Input-output impact risk propagation in critical infrastructure interdependency
Anttila, Teemu Integration of joint design of steel structures using product model
Anumba, Chimay The virtual construction simulator - development of an educational simulation game
Anumba, Chimay An integrated requirements management system for construction projects
Anumba, Chimay The multi agent paradigm and organizational abstractions in construction e-business
Arayici, Yusuf The key performance indicators of the BIM implementation process
Arboleda, Carlos The calculation of optimal premium in pricing ADR as an insurance product
Arciszewski, Tomasz Successful education: the key to engineering creativity
Arnold, Nicolas Process oriented model based information exchange between architecture and fabrication in early project phases
Ash, Elena Remote sensing technologies for infrastructure management: Russian experience
Ashour, Ashraf Neural network modelling of reinforced concrete beam shear capacity
Atasoy, Guzide Evaluation of toolkits for visualizing information about performance of earthwork activities on a construction job site
Atay, Hasan GIS based decision support system for health and safety management in linear projects
Au, Francis T.K. A general finite strip for the analysis of folded plates
Au, Francis T.K. Effects of long-term time-dependent behaviour on dynamic properties of cable-stayed bridges
Auersch, Lutz Vibration of buildings on pile groups due to railway traffic – finite-element boundary-element, approximating and prediction methods
Avendano Castillo, Jimmy A process-based framework for modelling risk-related failure costs in construction
Avendano Castillo, Jimmy A computer model for assessing project risks and occurrence of failure costs
Avendano Castillo, Jimmy Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives
Ayres Filho, Cervantes Building design teamwork supported by a collaborative CAD modeling process analysis
Ayres Filho, Cervantes A modeling level-oriented approach for Building Information Modeling
Azuma, Fabiola Building design teamwork supported by a collaborative CAD modeling process analysis
 

B         (top)

Babenko, Liya GIS and territorial planning
Bagchi, Ashutosh Design criteria of wireless sensors in structural health monitoring systems
Bajat, Branislav Topic specific search engines in civil engineering
Baldwin, Andrew N An integrated requirements management system for construction projects
Barakat, Samer Shuffled complex evolution optimizer for truss structure optimization
Barakat, Samer Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates
Bargstädt, Hans-Joachim A daily significant data basis for construction process simulation
Barison, Maria Bernardete An overview of BIM specialists
Barison, Maria Bernardete BIM teaching strategies: an overview of the current approaches
Barthrope, Stephen A Survey of the current state of e-commerce usage in the taiwanese architect, engineering and construction industry
Beber, Michele Building design teamwork supported by a collaborative CAD modeling process analysis
Becerik-Gerber, Burcin Exploring the use of wireless sensor networks in building management
Beck, Richard Climate change risks in decision-making in building design and facilities management
Becker, Adib Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems
Bel Hadj Ali, Nizar Self-repair of a tensegrity pedestrian bridge through grouped actuation
Bennett , Lloyd An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas
Bennett, Terry The future of design and construction processes – what owners will be looking for as they rebuild failing infrastructure
Berges, Mario Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms
Beucke, Karl Object versioning as a basis for design change management within a BIM context
Beucke, Karl An integrative approach for using multidisciplinary design optimization in AEC
Bewick, T A new method for very fast simulation of blast wave propagation in complex built environments
Bilchuk, Irina The identification dilemma of computational geometry
Birgonul, M. Talat Using Multi Agent Systems in Construction Claim Negotiation
Bisani, Mayur Optimization of highway construction work zones: the agency and user cost tradeoff
Bish, Doug Development of network-level linear programming optimization for pavement maintenance programming
Böhms, Michel IFC-based clash detection for the open-source BIMserver
Borenstein, Johann Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Borrell, Adam Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Borrmann, André Mathematical modeling of earthwork optimization problems
Bouchlaghem, Dino Developing a corporate information architecture: a case study
Bouchlaghem, Dino An evaluation of the fire safety emergency cover toolkit
Bouchlaghem, Dino People flow modelling in building design
Breit, Manfred Process oriented model based information exchange between architecture and fabrication in early project phases
Brilakis, Ioannis Visual recognition and assessment of concrete crack properties
Brocklehurst , David People flow modelling in building design
Brown, Chris Monitoring the deflections of bridges in the UK by GPS
Bull, Chris Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure
Burillo, Mateo Predicting the desired thermal comfort conditions for shared offices
 

C         (top)

Cahill, Brian Integration of radio frequency identification and building information modelling for decentralised information management
Cahill, Brian Using artificial intelligence to deliver optimised energy consumption
Caldas, Carlos A computer vision and reasoning based video interpretation system for rapid productivity analysis of construction operations
Calis, Gulben A comparative study for layout planning of temporary construction facilities: optimization by using ant colony algorithms
Carr, Jim Ultrasonic sensor + 4D virtual reality simulation environment for safety training
Carvalho, Isabel Engaging learners inside and outside the classroom
Cevik, Abdulkadir A new formulation for rotation of bare-steel joints at elevated temperatures using genetic programming
Chan, Andrew Fuzziness and randomness ‘a hybrid approach’ to risk management
Chan, Ben Y. B. An integrated finite strip solution for dynamic analysis of long span bridges
Chan, Ben Y. B. Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques
Chang, Chia-Feng Applying artificial neural networks to estimate the amount of chlorine in air
Chang, Chih-chian System development and performance evaluation of track intrusion in Taipei MRT system
Chang, Wei-Tsang Representational programming for design analysis
Charnwasununth, Phatsaphan Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system
Che, Linjing Using building information modeling for measuring the efficiency of building energy performance
Chen, Albert Automation for construction equipment request and deployment for emergency response
Chen, Chine-Ta Pavement distress image recognition using k-means and classification algorithms
Chen, Don Using building information modeling for measuring the efficiency of building energy performance
Chen, Hao Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Chen, Hung-Ming A video game-based training mode for decision making in construction project control and management
Chen, Jun Research on collapse simulation of Dixituojiang bridge
Chen, Yi SimuSurvey X : an improved virtual surveying instrument running off a game engine
Chen, Yixing Towards intelligent building systems: evaluating user acceptance of automatic control
Chen, Yu-sheng Applying artificial neural networks to estimate the amount of chlorine in air
Cheng, Jack C.P. Cloud computing and its implications for construction IT
Cheng, Jack C.P. Web-enabled model-based CAD for design
Cheng, Shaohong Nonlinear RC beam element model under combined action of axial compression, bending and shear
Cheng, Shaohong Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns
Cheung, Franco Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle
Cheung, Franco Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction
Cheung, Moe M. S. An integrated finite strip solution for dynamic analysis of long span bridges
Cheung, Moe M. S. Analysis and design of hybrid long span cable-stayed bridges using multi-scale modeling techniques
Cheung, Y.K. A general finite strip for the analysis of folded plates
Chi, Nai-Wen On effective passage partitioning for information retrieval on domain-specific technical reports
Chien, Hung-Ju A Survey of the current state of e-commerce usage in the taiwanese architect, engineering and construction industry
Chiurugwi, Tinashe Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment
Chou, Chien-Cheng Development of an online exam platform for the programming language course: ontology-based approach
Chou, Chien-Cheng Pavement distress image recognition using k-means and classification algorithms
Chou, Jui-Sheng Lessons learned from a collapsed wind turbine tower in Taiwan
Christodoulou, Symeon An entropy-based method for resource levelling
Chuang, Shih-Kun SimuSurvey X : an improved virtual surveying instrument running off a game engine
Coates, Paul The key performance indicators of the BIM implementation process
Cong, Zixiang Building performance analysis based on modelling and simulation
Cong, ZiXiang Integration of radio frequency identification and building information modelling for decentralised information management
Cory, Clark Impact of gaming application use in construction engineering education
Cory, Clark Evolution of a construction graphics course for engineering education
Cotsovos, Demetrios Numerical modeling of fibre-reinforced concrete
Courtier, Rodolphe Cross-disciplinary AEC teamwork supported by re-representation
Crawford, Wesley Virtual Reality for learning construction surveying
Crosbie, Tracey Energy profiling: supporting performance based approaches in sustainable building design
Crosbie, Tracey Cost effective refurbishment approach to achieve energy efficient building: a primary school case study
Cus Babic, Nenad InPro training environment – training platform for BIM based collaborative working
 

D         (top)

Dai, Fei Evaluation of photogrammetry for monitoring settlement of building adjacent to foundation jobsite
Dalili Shoaei, Mohammad Coupling parallel buildings by supplemental viscous damper device
Dawood, Nashwan Energy profiling: supporting performance based approaches in sustainable building design
Dawood, Nashwan Cost effective refurbishment approach to achieve energy efficient building: a primary school case study
Dawood, Nashwan Application of 3D terrain representation system for highway landscape design
Dawood, Nashwan Simulation modelling and multi-layer genetic algorithms to identify optimal crew allocation in the precast industry.
Dawood, Nashwan Development of a workspace conflict verification model for temporary facilities based on a VR simulation
Dawood, Saad Energy profiling: supporting performance based approaches in sustainable building design
de la Garza, Jesus Development of network-level linear programming optimization for pavement maintenance programming
de Wilde, Pieter Intelligent computing for the design of high performance buildings
de Wilde, Pieter Climate change risks in decision-making in building design and facilities management
Dean, John Cost effective refurbishment approach to achieve energy efficient building: a primary school case study
Demian, Peter An integrated requirements management system for construction projects
Demir, Salih A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing
Diao, Bo Durability evaluation software system of concrete structure based on BIM and 4D technology
Diao, Bo Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns
Diao, Bo Nonlinear RC beam element model under combined action of axial compression, bending and shear
Dib, Hazar Impact of gaming application use in construction engineering education
Dib, Hazar Evolution of a construction graphics course for engineering education
Dib, Hazar Virtual Reality for learning construction surveying
Dibley, Michael The application of intelligent agency in a software model for buildings
Dikmen, Irem Using Multi Agent Systems in Construction Claim Negotiation
Dinan, J A new method for very fast simulation of blast wave propagation in complex built environments
Dong, Suyang Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Du, Yongfeng Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes
 

E         (top)

East, E. William Analysis of three indoor localization technologies to support facility management field activities
East, E. William Analysis of life-cycle information exchange
El-Anwar, Omar Multi-objective optimization of process design using process-based sustainable impact analysis
El-Cheikh, Marwa Fuzziness and randomness ‘a hybrid approach’ to risk management
El-Gohary, Nora Towards a formal axiology for sustainable infrastructure development
El-Hamalawi, Ashraf Developing a corporate information architecture: a case study
Elamin, Ahmed The face bending behaviour of concrete filled structural hollow sections
Elazouni, Ashraf Multiobjective evolutionary finance-based scheduling: the entire projects' portfolio
Ellinas, Georgios An entropy-based method for resource levelling
Ellis, Ralph D. Parametric modeling in transportation construction
Ellis, Ralph D. IT in transportation construction: opportunities and barriers to implementation
Endy, Drew NanoBuild – concepts and requirements of nano-to-meter scale build
Erbas, Irem Description of a methodology for decision support for energy efficient housing redesign
Ergen, Esin A model-based and RFID integrated approach to streamline component information flow in construction projects
Ergen, Esin GIS based decision support system for health and safety management in linear projects
Erlemann, Kai Simulation of construction processes considering spatial constraints of crane operations
 

F         (top)

Fahdah, Ibrahim Practical software design for engineering application development
Fan, Su-Ling Experiences using building information modeling for a construction project
Faramarzi, Asaad An evolutionary numerical approach to modelling the mechanical properties of rubber concrete
Faramarzi, Asaad Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model
Faschingbauer, Gerald Semi-automation of logical decisions in monitoring procedures to realize adaptive geotechnical construction methods
Fekry, Ahmed Integration of daylighting simulation software in architectural education
Fendi, Karwan Using genetic algorithms to assist in the design of a water distribution network
Fidan, Gulsah Using Multi Agent Systems in Construction Claim Negotiation
Firmenich, Berthold Experiences from the application of processing-oriented building information in a CAD-based environment
Firmenich, Berthold Formalisation and assessment of data structure based coupling in distributed civil engineering applications
Fischer, Martin NanoBuild – concepts and requirements of nano-to-meter scale build
Flemming, Christian Cost management in a collaborative management system - a 5D-approach
Flemming, Ingo Cost management in a collaborative management system - a 5D-approach
Flood, Ian A new method for very fast simulation of blast wave propagation in complex built environments
Flowers, David A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure
Francis, Adel Dynamic production-based relationships between activities for construction projects' planning
Fröbel, Toni Formalisation and assessment of data structure based coupling in distributed civil engineering applications
Fruchter, Renate Cross-disciplinary AEC teamwork supported by re-representation
Fruchter, Renate From learning to space
Fukuda, Tomohiro Development of an accurate positioning method for augmented reality using multiple markers
Funamoto, Satoshi A study on traffic accident measures in municipal roads by using GIS
 

G         (top)

Gadi, Mohamed Calculating direct solar radiation on vaulted roofs using a new computer technique
Gadi, Mohamed Intensity of solar radiation on convex walls using a new computerized tool
Galishnikova, Vera Nonlinear numerical stability analysis of space trusses
Gao, Yang Using artificial intelligence to deliver optimised energy consumption
Gao, Zhili Using building information modeling for measuring the efficiency of building energy performance
Garrett, James H. A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing
Garrett, James H. Requirements for a computerized approach to plan sensor placement in the HVAC systems
Garrett, James H. Analysis of three indoor localization technologies to support facility management field activities
Garrett, James H. Potential utilization of building information models for planning maintenance activities
Garrett, James H. A future challenge for informatics: harnessing massive operational and condition data to better manage the infrastructure life-cycle
Geng, Yan DEM simulation of cylindrical cavity expansion in granular material
Gerami, Mohsen Evaluation of cyclic response of RBS connection including panel zone effects
Gerami, Mohsen Nonlinear behavior Of RBS connections in steel moment frames
German, Stephanie Visual recognition and assessment of concrete crack properties
Gerold, Fabian Integrative structural design
Gershenzon, Vladimir Remote sensing technologies for infrastructure management: Russian experience
Geyer, Philipp An integrative approach for using multidisciplinary design optimization in AEC
Ghaznavi Oskoei, Amin Evaluation of cyclic response of RBS connection including panel zone effects
Ghaznavi Oskoei, Amin Nonlinear behavior Of RBS connections in steel moment frames
Giel, Brittany Return on investment analysis of building information modeling in construction
Ginzburg, Alexander Organizational and technological reliability of construction companies
Gokce, Umut Information modelling for building maintenance using mobile clients
Golparvar-Fard, Mani Model-based detection of progress using D4AR models generated by daily site photologs and building information models
Golparvar-Fard, Mani Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models
Gong, Jie A computer vision and reasoning based video interpretation system for rapid productivity analysis of construction operations
Goulding, Jack Strategic positioning of IT in construction: the way forward
Goulding, Jack Achieving IT-based sustainable competitive advantage in construction: organisational soft issues
Granholm, Leif Towards interoperable open digital building information models
Günthner, Willibald A. 3D-Planning of construction site equipment based on process simulation
Gursel, Ipek Supporting performance data acquisition and analysis for corporate public real estate management
 

H         (top)

Hadianfard, Mohammad Ali Advanced nonlinear time-history analysis of partially restrained steel frames by using integrated equations of motion
Halighongde, Shankar Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems
Hall, Christian Evolution of a construction graphics course for engineering education
Halman, Johannes A process-based framework for modelling risk-related failure costs in construction
Halman, Johannes A computer model for assessing project risks and occurrence of failure costs
Halman, Johannes Risk-based decision making in construction: a case of planning and risk assessment of construction alternatives
Ham, Sung-il Space-connector model for representing spatial relations in a quantitative space analysis
Hamad, Waleed Modelling the nonlinear behaviour of a cracked reinforced concrete beam
Hamm, Matthias Constraint-based multi-objective optimization of construction schedules
Hammad, Amin Improving construction safety through real-time motion planning of cranes
Hammad, Amin Role-based access to facilities lifecycle information on RFID tags
Hammad, Amin Feasibility of location tracking of construction resources using UWB for better productivity and safety
Hammad, Amin Design criteria of wireless sensors in structural health monitoring systems
Han, Charles S. Web-enabled model-based CAD for design
Han, SangUk Framework for a resilience system in safety management: a simulation and visualization approach
Hara, Takashi Design, analysis and application of moving scaffold to the structural maintenance
Harrison, Catherine Successful education: the key to engineering creativity
Hartmann, Dietrich Agent-oriented development of hybrid wind turbine monitoring systems
Hartmann, Timo Comparing structure-based and function-based user interfaces for traffic simulation
Harty, Chris Implementing building information modelling: a case study of the Barts and the London hospitals
Häubi, Fritz Process oriented model based information exchange between architecture and fabrication in early project phases
Hawileh, Rami Energy-based predictions of number of reversals to fatigue failure of steel bars using artificial neural network
Hayashi, Yoshitugu Automatic generation of 3-d building models from multiple bounded polygons
Hazrati, Ayoub Evaluation of construction contractors in developing countries using fuzzy SAW method
He, Yonglong Simulations on cross-ties for vibration control of long span cable-stayed bridges
Heinisuo, Markku Integration of joint design of steel structures using product model
Hejazi, Farzad Coupling parallel buildings by supplemental viscous damper device
Hilbert, Frank Dynamic context-aware information access in virtual organizations
Hironobu, Haishima Preliminary inspection about the profit of 3D data in public works
Ho, Ting-Wu Pavement distress image recognition using k-means and classification algorithms
Hogg, Keith Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment
Holland, Robert J. BIM collaboration across six disciplines
Horenburg, Tim 3D-Planning of construction site equipment based on process simulation
Hou, Lei A novel application in guiding assembly task: augmented reality animation
Howard, Elizabeth Evolution of a construction graphics course for engineering education
Howard, Elizabeth Impact of gaming application use in construction engineering education
Hsieh, Shang-Hsien Experiences using building information modeling for a construction project
Hsieh, Shang-Hsien SimuSurvey X : an improved virtual surveying instrument running off a game engine
Hsieh, Shang-Hsien On effective passage partitioning for information retrieval on domain-specific technical reports
Hsieh, Yo-Ming An interactive 3D visualization system for displaying field-monitoring data
Hu, Zhenzhong Development of a sub building information model for 4D structural safety analysis during construction
Hua, Bingcan Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Huang, Chudong An integration framework of arch bridge modeling for testing analysis
Huang, Chudong Research on collapse simulation of Dixituojiang bridge
Huang, Hongwei Simulations on cross-ties for vibration control of long span cable-stayed bridges
Hubers, Hans IFC based BIM or parametric design?
Huhnt, Wolfgang Visualization of construction process models
Hung, Shih-Lin The study of combining hive-grid target with sub-pixel analysis for measurement of structural experiment
Hunt, Hugh An efficient formulation for calculating the vibration response of piled foundations due to excitation by an underground railway
Hunt, Hugh Simulating ground vibration from underground railways through subsiding soil layers
Hunt, Hugh Simple, yet puzzling, problems in vibration
Hussein, Mohammed Modelling the nonlinear behaviour of a cracked reinforced concrete beam
Hussein, Mohammed Modelling vibration from surface and underground railways as an evolutionary random process
Hussein, Mohammed Dynamic response of a laterally-loaded infinite rigid cylinder embedded in a saturated poroelastic medium
Hyari, Khaled Optimization of highway construction work zones: the agency and user cost tradeoff
Hyde, Tom Finite Element Analysis of creep crack growth using the C* parameter in multi-domain problems
 

I         (top)

Ibrahim, Rahinah Cognitive transformation mediated by VR 3D sketching during conceptual architectural design process
Irizarry, Javier Mobile application for land study using geographic information systems
Issa, R. Raymond A. Feasibility of integrating building information modeling and LEED® certification process
Issa, R. Raymond A. Factors influencing the adoption of building information modeling in the AEC Industry
Issa, R. Raymond A. Web-based on-demand information extraction system for building information models
Issa, R. Raymond A. Return on investment analysis of building information modeling in construction
Issa, R. Raymond A. Ultrasonic sensor + 4D virtual reality simulation environment for safety training
Izzuddin, Bassam Practical software design for engineering application development
 

J         (top)

Jaafar, Mohd Saleh Coupling parallel buildings by supplemental viscous damper device
Jallow, Abdou Karim An integrated requirements management system for construction projects
Javadi, Akbar An evolutionary numerical approach to modelling the mechanical properties of rubber concrete
Javadi, Akbar Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study
Javadi, Akbar Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model
Jeffrey, Howard Implementing building information modelling: a case study of the Barts and the London hospitals
Ji, Sae-Hyun Similarity measurement method of case-based reasoning for conceptual cost estimation
Ji, Yang Mathematical modeling of earthwork optimization problems
Jian, Chen-you Applying artificial neural networks to estimate the amount of chlorine in air
Jiang, Ruijuan A general finite strip for the analysis of folded plates
Jones, Huw Combined strategy for efficient collision detection in 4D planning applications
Jones, Simon Simulating ground vibration from underground railways through subsiding soil layers
Jones, Stephen Combined strategy for efficient collision detection in 4D planning applications
Jung, Tae-Hwan Tag-Manager Based Document Management Prototype System of Building Material Information
Jung, Youngsoo Automated progress measurement and management in construction: variables for theory and implementation
 

K         (top)

Kagan, Pavel Tall building construction: some aspects of planning and organization
Kageyama, Teruaki Preliminary inspection about the profit of 3D data in public works
Kagioglou, Mike The key performance indicators of the BIM implementation process
Kamat, Vineet Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Kandil, Amr Contractual document process model for document management
Kandil, Amr Automated outcome prediction model for differing site conditions through support vector machines
Kandil, Amr Optimization of highway construction work zones: the agency and user cost tradeoff
Kang, LeenSeok Development of a workspace conflict verification model for temporary facilities based on a VR simulation
Kang, Shih-Chung Experiences using building information modeling for a construction project
Kang, Shih-Chung A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments
Kang, Shih-Chung SimuSurvey X : an improved virtual surveying instrument running off a game engine
Kang, Youngcheol Assessing the benefits and hindrances of information integration opportunities
Kao, Catherine A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments
Karczewski, Björn Physical nonlinear model identification in model-based long-term structural health monitoring
Kartamysheva, Alexandra GIS and territorial planning
Kassim, Yahuza A non-parametric algorithm for computing information technology induced productivity in the construction value chain
Katranuschkov, Peter Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects
Katranuschkov, Peter Dynamic context-aware information access in virtual organizations
Katsunori, Miyamoto Preliminary inspection about the profit of 3D data in public works
KAWASE, Shunya Optimization system for facility placement in residential areas using multi-objective genetic algorithms
Kazakov, Konstantine Combined strategy for efficient collision detection in 4D planning applications
Keith, Douglas Virtual Reality for learning construction surveying
Kessler, Stephan 3D-Planning of construction site equipment based on process simulation
Khamavova, Albina GIS and territorial planning
Khan, Muhammad Ali Quantitative quality assessment of network-based schedules
Khosrowshahi, Farzad Strategic positioning of IT in construction: the way forward
Khosrowshahi, Farzad A preliminary framework for research in spatial data sharing
Kilian, Axel Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight
Kim, Hyunjoo Developing energy efficient building design in machine learning
Kim, Yong-Woo Multi-objective optimization of process design using process-based sustainable impact analysis
Kirkegaard, Poul Henning Evaluation of BIM and Ecotect for conceptual architectural design analysis
Kislitsyn, Dmitriy Distributed computing for construction project design by division into project design units
Kiziltas, Semiha A model-based and RFID integrated approach to streamline component information flow in construction projects
Koch, Christian Formalisation and assessment of data structure based coupling in distributed civil engineering applications
Koch, Christian Experiences from the application of processing-oriented building information in a CAD-based environment
Koenig, Markus Constraint-based multi-objective optimization of construction schedules
Koike, Hirotaka A study on traffic accident measures in municipal roads by using GIS
Koike, Hirotaka A study on effects of providing environmental information using three dimensional computer graphics
König, Markus Simulation of construction processes considering spatial constraints of crane operations
Konukcu, Selda An evaluation of the fire safety emergency cover toolkit
Koo, Kyo-Jin Tag-Manager Based Document Management Prototype System of Building Material Information
Korkmaz, Sinan Self-repair of a tensegrity pedestrian bridge through grouped actuation
Korzhun, Andrey Ways to automate of process of optimal design decisions generation in the multicriteria optimization conditions
Koskela , Lauri The key performance indicators of the BIM implementation process
Kouchmeshki, Kaveh Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm
Kovacevic, Milos Topic specific search engines in civil engineering
Kripakaran, Prakash Structural identification through continuous monitoring: data cleansing using temperature variations
Krueger, Denise Development of network-level linear programming optimization for pavement maintenance programming
Kuang, J S Effect of out-of-plane loading on in-plane behaviour of unreinforced infilled RC frames
Kubota, Satoshi 4D Information Management System for Road Maintenance Using GIS
Kulathunga, D D T K Buckling of defective carbon nanotube
Kulikova, Ekaterina Construction of the e-learning training complex: structure, parameters and functional possibilities of the courses
Kumar, Bimal Web-enabled model-based CAD for design
Kumar, Bimal Cloud computing and its implications for construction IT
Kuo, Kirsty An efficient formulation for calculating the vibration response of piled foundations due to excitation by an underground railway
Kwak, Hyo-gyoung Development of nonlinear model for slender concrete in-filled steel tube column
Kwak, Ji-hyun Development of nonlinear model for slender concrete in-filled steel tube column
Kwan, A Gains and losses of information when collaborating remotely over a network communication in the construction industry
 

L         (top)

Laasonen, Mauri Integration of joint design of steel structures using product model
Laasonen, Mauri Data exchange from BIM to building-use simulation
Lai, Jihn-Sung A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments
Lamb, Julian Fuzziness and randomness ‘a hybrid approach’ to risk management
Laofor, Chollada Development of system and algorithm for evaluating defect level in architectural work
Laory, Irwanda Structural identification through continuous monitoring: data cleansing using temperature variations
Lau, Shing-Tak Douglas Re-entrant area studies using computational fluid dynamics
Law, Kincho H. Web-enabled model-based CAD for design
Lee, Bill L.P. A wireless climatic information system for construction sites
Lee, Bill L.P. A web-based academic records tracking system for outcome-based education
Lee, Chijoo Economic Impact of Safety Improvement by a Rotation-controllable Tower-crane Hook Block
Lee, Ghang Economic Impact of Safety Improvement by a Rotation-controllable Tower-crane Hook Block
Lee, Ghang Identifying the consideration factors for successful BIM projects
Lee, Ghang Space-connector model for representing spatial relations in a quantitative space analysis
Lee, Hyun-Soo Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM
Lee, Hyun-Soo Similarity measurement method of case-based reasoning for conceptual cost estimation
Lee, Sanghoon The virtual construction simulator - development of an educational simulation game
Lee, SangHyun Framework for a resilience system in safety management: a simulation and visualization approach
Lee, SangHyun Enhanced estimation of air emissions from construction operations based on discrete-event simulation
Lee, Sookyong Automated progress measurement and management in construction: variables for theory and implementation
Lee, Tim Hau A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments
Leung, Arthur W.T. Assessing the impacts of spatial profile on site production using clustering techniques
Li, Ding Research on 4D virtual construction and dynamic management system based on BIM
Li, Ding A research on coupling prediction model for multi-disaster
Li, Haijiang The application of intelligent agency in a software model for buildings
Li, Huaxiang Shakedown analysis of soil materials based on an incremental approach
Li, Hui Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes
Li, Ming The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs
Li, Nan Exploring the use of wireless sensor networks in building management
Li, Shuchun Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns
Li, Wanheng Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW
Li, Wanheng The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs
Li, Yungui A software platform for information conversion from IFC-based architectural model to PKPM structural model
Limsupreeyarat, Petcharat Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality
Lin, Chia-Ying Development of an online exam platform for the programming language course: ontology-based approach
Lin, Hsien-Tang On effective passage partitioning for information retrieval on domain-specific technical reports
Lin, Jyh-Dong Pavement distress image recognition using k-means and classification algorithms
Lin, Ken-Yu An operational model for locating and sharing online learning resources – using construction safety as an example
Lin, Lee-kuo System development and performance evaluation of track intrusion in Taipei MRT system
Lin, Lee-kuo Applying artificial neural networks to estimate the amount of chlorine in air
Lin, Yang A video game-based training mode for decision making in construction project control and management
Lin, Zhidan Analysis of buckling failure of rubber isolators serially connected with cantilever column subject to major earthquakes
Little, Andrew P.F. Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure
Little, Andrew P.F. Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure
Little, Andrew P.F. Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure
Little, Andrew P.F. A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure
Little, Andrew P.F. Composite tubing collapse under uniform external hydrostatic pressure
Liu, Rui Factors influencing the adoption of building information modeling in the AEC Industry
Liu, Wenpeng Durability evaluation software system of concrete structure based on BIM and 4D technology
Liu, Xuesong Requirements for a computerized approach to plan sensor placement in the HVAC systems
Liu, Zhaoqiu A software platform for information conversion from IFC-based architectural model to PKPM structural model
Loh, Eugene Cost effective refurbishment approach to achieve energy efficient building: a primary school case study
Loh, Eugene Energy profiling: supporting performance based approaches in sustainable building design
Long, Gavin Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring
Long, Gavin Simulation for education in construction and construction management - IT or not IT
Lou, Eric Choen Weng Achieving IT-based sustainable competitive advantage in construction: organisational soft issues
Lou, Eric Choen Weng Strategic positioning of IT in construction: the way forward
Lu, Chiao-Yun A generalized procedure to develop a virtual environment for the conducting of hydraulics laboratory experiments
Lu, Jianming An integration framework of arch bridge modeling for testing analysis
Lu, Jianming Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
Lu, Jianming The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs
Lu, Jianming Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW
Lu, Ming Evaluation of photogrammetry for monitoring settlement of building adjacent to foundation jobsite
Lu, Ning Approach to representing information resources in construction firms by using IFC based on object-oriented method
Lu, Tao Numerical simulation of the influence of pavement stiffness on energy dissipation
Lu, Xiao A preliminary study on the application of computer simulation in the progressive collapse of bridges
Lu, Xilin A software platform for information conversion from IFC-based architectural model to PKPM structural model
Lu, Xinzheng A preliminary study on the application of computer simulation in the progressive collapse of bridges
Lu, Xinzheng Development of a sub building information model for 4D structural safety analysis during construction
Lu, Ya-Sue An interactive 3D visualization system for displaying field-monitoring data
Lu, Yung-Chi The study of combining hive-grid target with sub-pixel analysis for measurement of structural experiment
Lund Jensen, Rasmus Evaluation of BIM and Ecotect for conceptual architectural design analysis
 

M         (top)

Ma, Zhiliang Approach to representing information resources in construction firms by using IFC based on object-oriented method
Mahfouz, Tarek Automated outcome prediction model for differing site conditions through support vector machines
Mak, Stephen A wireless climatic information system for construction sites
Mak, Stephen A web-based academic records tracking system for outcome-based education
Makanae, Koji Application of 3D terrain representation system for highway landscape design
Manjia, Marcelline An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon
Manzoor, Farhan Integration of radio frequency identification and building information modelling for decentralised information management
Maravas, Alexander A study of cash flows in projects with fuzzy activity durations
Marx, Arnim Simulation of construction processes considering spatial constraints of crane operations
Masakazu, Kawakami Preliminary inspection about the profit of 3D data in public works
Mashina, Giamal Calculating direct solar radiation on vaulted roofs using a new computer technique
Mashina, Giamal Intensity of solar radiation on convex walls using a new computerized tool
Matin Md, A. Experiences using building information modeling for a construction project
Matthews, H. Scott Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms
Matveyo, Roman GIS and territorial planning
Mawdesley, Michael Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring
Mawdesley, Michael A genetic algorithm approach to highway alignment development
Mawdesley, Michael Using genetic algorithms to assist in the design of a water distribution network
Mawdesley, Michael Simulation for education in construction and construction management - IT or not IT
McCullouch, Bob A paperless, all digital engineering design class
McDowell , Glenn DEM simulation of cylindrical cavity expansion in granular material
McGibbney, Lewis Cloud computing and its implications for construction IT
Mehravar, Moura Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model
Meng, Cunxi Study and key technology of computer application integration in railway survey and design
Menzel, Karsten Using artificial intelligence to deliver optimised energy consumption
Menzel, Karsten Model-based estimation of rooms’ energy consumption in building with renewable energy sources
Menzel, Karsten Information modelling for building maintenance using mobile clients
Menzel, Karsten Building performance analysis based on modelling and simulation
Menzel, Karsten Integration of radio frequency identification and building information modelling for decentralised information management
Messner, John I. BIM collaboration across six disciplines
Messner, John I. The virtual construction simulator - development of an educational simulation game
Michaelidou-Kamenou, Anastasia An entropy-based method for resource levelling
Mikami, Ichizou 4D Information Management System for Road Maintenance Using GIS
Milani, Enrico Kinematic FE limit analysis homogenization model for masonry walls reinforced with continuous GFRP grids
Milani, Gabriele Kinematic FE limit analysis homogenization model for masonry walls reinforced with continuous GFRP grids
Miles, John The application of intelligent agency in a software model for buildings
Miles, John Gains and losses of information when collaborating remotely over a network communication in the construction industry
Miresco, Edmond Dynamic production-based relationships between activities for construction projects' planning
Mochinaga, Daisuke Fundamental research on the optimal display of digital map according to scales based on the space perception
Mohamed, Sherif Input-output impact risk propagation in critical infrastructure interdependency
Mondragon, Fernando Understanding our students: a technology and construction baseline survey
Monobe, Kantaro Fundamental research on the optimal display of digital map according to scales based on the space perception
Moon, HyounSeok Development of a workspace conflict verification model for temporary facilities based on a VR simulation
Moore, Thomas NanoBuild – concepts and requirements of nano-to-meter scale build
Morimoto, Akinori A study on effects of providing environmental information using three dimensional computer graphics
Morimoto, Akinori A study on traffic accident measures in municipal roads by using GIS
Motamedi, Ali Role-based access to facilities lifecycle information on RFID tags
Mourshed, Monjur Luminaire position optimisation using radiance based simulation: a test case of a senior living room
Mourshed, Monjur Optimisation of a daylight-window: hospital patient room as a test case
Mousavi Nezhad, Mohaddeseh Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study
Müller, Marina Figueiredo A modeling level-oriented approach for Building Information Modeling
Muminova, Svetlana Tall building construction: some aspects of planning and organization
Muthukumar, S. Mobile application for land study using geographic information systems
Mutis, Ivan Understanding technology in learning settings based on structurational analysis
 

N         (top)

Nakamura, Kenji Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life
Nassar, Khaled Daylight as an evolutionary architectural form finder
Nassar, Khaled New advances in the automated architectural space plan layout problem
Nassar, Khaled A simplified model for the interactive generation of architectural space layout
Nassar, Khaled Schedule network complexity versus project complexity
Nel, W Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment
Neto, Pedro Engaging learners inside and outside the classroom
Nguyen, Tang-Hung Using building information modeling for measuring the efficiency of building energy performance
Nguyen, Thuy Understanding our students: a technology and construction baseline survey
Nham, Nguyen Van A study on traffic accident measures in municipal roads by using GIS
Nikolic, Dragana The virtual construction simulator - development of an educational simulation game
Nisbet, Nicholas Analysis of life-cycle information exchange
Noorzaei, Jamaloddin Coupling parallel buildings by supplemental viscous damper device
Nour, Mohamed Object versioning as a basis for design change management within a BIM context
 

O         (top)

O'Brien, William Understanding our students: a technology and construction baseline survey
O'Brien, William Assessing the benefits and hindrances of information integration opportunities
O'Brien, William A decision support tool for subcontractor multi-project resource allocation
O'Connor, James Assessing the benefits and hindrances of information integration opportunities
O'Reilly, Karen The key performance indicators of the BIM implementation process
Obonyo, Esther The multi agent paradigm and organizational abstractions in construction e-business
Ojeda, Lauro Integration of global positioning system and inertial navigation for ubiquitous context-aware engineering applications
Olbina, Svetlana Factors influencing the adoption of building information modeling in the AEC Industry
Olbina, Svetlana Web-based on-demand information extraction system for building information models
Olbina, Svetlana Return on investment analysis of building information modeling in construction
Osman, Ashraf Dynamic response of a laterally-loaded infinite rigid cylinder embedded in a saturated poroelastic medium
Ota, Naoki Development of an accurate positioning method for augmented reality using multiple markers
Otani, Kazufumi Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life
Oti, Akponanabofa Henry Developing incentives for collaboration in the AEC Industry
Owen, John Modelling the nonlinear behaviour of a cracked reinforced concrete beam
Owusu, Albert Input-output impact risk propagation in critical infrastructure interdependency
 

P         (top)

Pahl, Peter Jan The influence of theories on the quality of computer models
Palmer, Mark E. A Semantic Web-based approach for representing and reasoning with vocabulary for computer-based standards processing
Pan, Wei Climate change risks in decision-making in building design and facilities management
Pan, Wenjia Enhanced estimation of air emissions from construction operations based on discrete-event simulation
Pantouvakis, John-Paris A study of cash flows in projects with fuzzy activity durations
Park, Hyung-Jin Tag-Manager Based Document Management Prototype System of Building Material Information
Park, Moonseo Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM
Park, Moonseo Similarity measurement method of case-based reasoning for conceptual cost estimation
Parry, Tony Numerical simulation of the influence of pavement stiffness on energy dissipation
Patterson, Dan Schedule metric analysis: a formalized approach to more realistic planning...
Peansupap, Vachara Development of system and algorithm for evaluating defect level in architectural work
Peña-Mora, Feniosky The calculation of optimal premium in pricing ADR as an insurance product
Peña-Mora, Feniosky Model-based detection of progress using D4AR models generated by daily site photologs and building information models
Peña-Mora, Feniosky Framework for a resilience system in safety management: a simulation and visualization approach
Peña-Mora, Feniosky Automation for construction equipment request and deployment for emergency response
Peña-Mora, Feniosky Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models
Peña-Mora, Feniosky Enhanced estimation of air emissions from construction operations based on discrete-event simulation
Peng, Weibing An integration framework of arch bridge modeling for testing analysis
Peng, Weibing Research on collapse simulation of Dixituojiang bridge
Petronijevic, Predrag Topic specific search engines in civil engineering
Pettang, Chrispin An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon
Pihlak, Madis BIM collaboration across six disciplines
Pitrakkos, Theodoros Pull-out behaviour of anchored blind-bolt: a component based approach
Ploennigs, Joern Model-based estimation of rooms’ energy consumption in building with renewable energy sources
Poerschke, Ute BIM collaboration across six disciplines
Poh, Leong Hien Implicit gradient-enhanced strain softening material models
Pour Rahimian, Farzad Cognitive transformation mediated by VR 3D sketching during conceptual architectural design process
Pourazima, Hassan Mobile application for land study using geographic information systems
Pradhan, Anu An approach for fusing data from multiple sources to support construction productivity monitoring
Price, Andrew Luminaire position optimisation using radiance based simulation: a test case of a senior living room
Price, Andrew Optimisation of a daylight-window: hospital patient room as a test case
 

Q         (top)

Qari, Azzam Towards a formal axiology for sustainable infrastructure development
Qi, Xueda Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
 

R         (top)

Rafiq, Yaqub Intelligent computing for the design of high performance buildings
Rahnema, Hosein Advanced nonlinear time-history analysis of partially restrained steel frames by using integrated equations of motion
Rajaie, Hossein Evaluation of construction contractors in developing countries using fuzzy SAW method
Rakha, Tarek Daylight as an evolutionary architectural form finder
Rakha, Tarek Integration of daylighting simulation software in architectural education
Rank, Ernst Mathematical modeling of earthwork optimization problems
Raphael, Benny A non-parametric algorithm for computing information technology induced productivity in the construction value chain
Raphael, Benny Towards intelligent building systems: evaluating user acceptance of automatic control
Raps, Michael Process oriented model based information exchange between architecture and fabrication in early project phases
Rashidi, Abbas Evaluation of construction contractors in developing countries using fuzzy SAW method
Rebolj, Danijel NanoBuild – concepts and requirements of nano-to-meter scale build
Rebolj, Danijel InPro training environment – training platform for BIM based collaborative working
Reddy, J N Buckling of defective carbon nanotube
Redekop, David Free vibration of a magneto-electro-elastic toroidal shell
Ren, Aizhu Smoke assessment of building fire based on FDS and GIS
Ren, Aizhu A research on coupling prediction model for multi-disaster
Ren, Zhaomin The assessment of RFID facilitated construction material management system - a case study of water supply project
Rezania, Mohammad Stochastic finite element modeling of water flow and solute transport in unsaturated soils - a case-study
Rezgui, Yacine The application of intelligent agency in a software model for buildings
Richter, Sven Visualization of construction process models
Roberts, Gethin Monitoring the deflections of bridges in the UK by GPS
Rodriguez, Sonia Feasibility of location tracking of construction resources using UWB for better productivity and safety
Ronni, H Integration of joint design of steel structures using product model
Ross, Carl T.F. Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure
Ross, Carl T.F. Plastic axisymmetric collapse of circular cylinders and cones under uniform external pressure
Ross, Carl T.F. Plastic non-symmetric bifurcation buckling of circular cylinders under uniform external hydrostatic pressure
Ross, Carl T.F. Composite tubing collapse under uniform external hydrostatic pressure
Ross, Carl T.F. A theoretical and experimental investigation of externally ring-stiffened cylindrical pressure vessels subjected to external pressure
Ross, Eve A 3-D learning environment for teaching the collaboration to civil engineers
Rüppel, Uwe BIM-based immersive indoor graph networks for emergency situations in buildings
Rüppel, Uwe BIM-based virtual training environment for fire-fighters
Ruzika, Stefan Mathematical modeling of earthwork optimization problems
 

S         (top)

Sabry, Hanan Integration of daylighting simulation software in architectural education
Saini, Rakesh Role-based access to facilities lifecycle information on RFID tags
Salleh, Norzamni A preliminary framework for research in spatial data sharing
Sambo, Kari An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon
Sansour, Carlo Computational non-linear structural dynamics and energy-momentum integration schemes
Santos, Eduardo Toledo An overview of BIM specialists
Santos, Eduardo Toledo BIM teaching strategies: an overview of the current approaches
Santos, João Impact of the Eurocode 2 proposals for nonlinear analysis on lateral deformability and design of R.C. structures
Sarioletlagh Fard , Sahand Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm
Sariyildiz, Sevil Description of a methodology for decision support for energy efficient housing redesign
Sariyildiz, Sevil Supporting performance data acquisition and analysis for corporate public real estate management
Sariyildiz, Sevil Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight
Sasakawa, Kazuhiko Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency
Savarese, Silvio Model-based detection of progress using D4AR models generated by daily site photologs and building information models
Savarese, Silvio Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models
Schach, Rainer Cost management in a collaborative management system - a 5D-approach
Schapke, Sven-Eric Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects
Schatz, Kristian BIM-based virtual training environment for fire-fighters
Scheer, Sergio A modeling level-oriented approach for Building Information Modeling
Scheer, Sergio Building design teamwork supported by a collaborative CAD modeling process analysis
Scherer, Raimar Semi-automation of logical decisions in monitoring procedures to realize adaptive geotechnical construction methods
Scherer, Raimar Ontology-based ICT-platform for management, simulation and decision making in large scale construction projects
Scherer, Raimar Dynamic context-aware information access in virtual organizations
Schmidt, Kathy Understanding our students: a technology and construction baseline survey
Schneider, Richard Developing energy efficient building design in machine learning
Schnellenbach-Held, Martina Physical nonlinear model identification in model-based long-term structural health monitoring
Scholtenhuis, L L olde Comparing structure-based and function-based user interfaces for traffic simulation
Schumann, Anika Predicting the desired thermal comfort conditions for shared offices
Scott, David Life-cycle costing analysis to assist design decisions: beyond 3D building information modelling
Scott, David Simulation for education in construction and construction management - IT or not IT
Seipp, Florian Mathematical modeling of earthwork optimization problems
Sekhar, Chandra Towards intelligent building systems: evaluating user acceptance of automatic control
Semenov, Vitaly Combined strategy for efficient collision detection in 4D planning applications
Shanableh, Abdullah Seismic fragility assessment of model buildings in Sharjah, United Arab Emirates
Sharma, Shrikant People flow modelling in building design
Shaurette, Mark Simulation tools to support energy efficient retrofit of small commercial buildings
Sheina, Svetlana GIS and territorial planning
Shen, Zhenyuan An integrated finite strip solution for dynamic analysis of long span bridges
Sherif, Ahmed Integration of daylighting simulation software in architectural education
Sheriff, Abdullahi Developing a corporate information architecture: a case study
Shi, Wei Ultrasonic sensor + 4D virtual reality simulation environment for safety training
Shigidi, Abdalla M.T. Hydrologic analysis of digital elevation models using archydro extension
Shikder, Shariful Luminaire position optimisation using radiance based simulation: a test case of a senior living room
Shikder, Shariful Optimisation of a daylight-window: hospital patient room as a test case
Shimomura, K Design, analysis and application of moving scaffold to the structural maintenance
Shiu, Ruei-Shiue SimuSurvey X : an improved virtual surveying instrument running off a game engine
Shumeev, Victor GIS and territorial planning
Si, X.T. Effects of long-term time-dependent behaviour on dynamic properties of cable-stayed bridges
Siddiqui, Mohsin Quantitative quality assessment of network-based schedules
Siplon, Page Simulating port logistics operations using 3D visualization technology
Smarsly, Kay Agent-oriented development of hybrid wind turbine monitoring systems
Smith, Ian F.C. Structural identification through continuous monitoring: data cleansing using temperature variations
Smith, Ian F.C. Self-repair of a tensegrity pedestrian bridge through grouped actuation
Smith, Martin An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas
Smith, Martin Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring
Smith, Paul Composite tubing collapse under uniform external hydrostatic pressure
Soibelman, Lucio Leveraging data from environmental sensors to enhance electrical load disaggregation algorithms
Soibelman, Lucio Analysis of three indoor localization technologies to support facility management field activities
Song, Jianyong Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW
Song, Jin-Kyu Neural network modelling of reinforced concrete beam shear capacity
Song, Liangliang Research on collapse simulation of Dixituojiang bridge
Song, Xinyi The calculation of optimal premium in pricing ADR as an insurance product
Sornsuriya, Kittisak Building information model for evaluating the building energy performance: a case study
Soujeri, Ebrahim An artificial neural network model for estimating the influence of change orders on project performance and dispute resolution
Stace, Rod A genetic algorithm approach to highway alignment development
Stack, Paul Information modelling for building maintenance using mobile clients
Stack, Paul Model-based estimation of rooms’ energy consumption in building with renewable energy sources
Stagg, Malcolm Implementing building information modelling: a case study of the Barts and the London hospitals
Stein, Peter NURBS solid modelling using an operator-based approach
Stouffs, Rudi Description of a methodology for decision support for energy efficient housing redesign
Stouffs, Rudi Representational programming for design analysis
Stouffs, Rudi Supporting performance data acquisition and analysis for corporate public real estate management
Stouffs, Rudi Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms
Stübbe, Kai BIM-based immersive indoor graph networks for emergency situations in buildings
Stumpf, Annette Developing energy efficient building design in machine learning
Sugihara, Kenichi Automatic generation of 3-d building models from multiple bounded polygons
Sun, Limin Simulations on cross-ties for vibration control of long span cable-stayed bridges
Suprun, Anatoliy Distributed computing for construction project design by division into project design units
Swaddiwudhipong, Somsak Implicit gradient-enhanced strain softening material models
Syed Mohsin, Sharifah Numerical modeling of fibre-reinforced concrete
 

T         (top)

Tah, J.H.M. An ontology-driven approach to labour cost estimation: The case of house-building projects in Cameroon
Tah, J.H.M. Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction
Tah , J.H.M. Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle
Taha, Ahmad Simulation of airborne LiDAR for the assessment of its role in infrastructure asset monitoring
Tam, Chi Ming Assessing the impacts of spatial profile on site production using clustering techniques
Tanaka, Shigenori Fundamental research on the optimal display of digital map according to scales based on the space perception
Tanaka, Shigenori Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life
Taneja, Saurabh Analysis of three indoor localization technologies to support facility management field activities
Tang, Fangqin Smoke assessment of building fire based on FDS and GIS
Tangaramvong, Sawekchai Some engineering mechanics applications of mathematical programs with equilibrium constraints
Tani, Akinori Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency
Tani, Akinori Optimization system for facility placement in residential areas using multi-objective genetic algorithms
Tani, Akinori A building structural-performance monitoring system using RFID tag with sensors
Tantisevi, Kevin Building information model for evaluating the building energy performance: a case study
Tham, Kwok Wai Towards intelligent building systems: evaluating user acceptance of automatic control
Thanoon, W Coupling parallel buildings by supplemental viscous damper device
Thom, Nick Numerical simulation of the influence of pavement stiffness on energy dissipation
Thomas, Joyce Remote assessment of pre- and post-disaster critical physical infrastructures using mobile workstation chariot and D4AR models
Throssell, David Implementing building information modelling: a case study of the Barts and the London hospitals
Throssell, David Design, delivery, and maintenance - important issues with using BIM
Thuesen, Niels Evaluation of BIM and Ecotect for conceptual architectural design analysis
Tian, Wei Climate change risks in decision-making in building design and facilities management
Tin-Loi, Francis Some engineering mechanics applications of mathematical programs with equilibrium constraints
Tizani, Walid Pull-out behaviour of anchored blind-bolt: a component based approach
Tizani, Walid Modelling techniques of composite joints under cyclic loading
Tizani, Walid Developing incentives for collaboration in the AEC Industry
Tizani, Walid The face bending behaviour of concrete filled structural hollow sections
Tobin, Ena Information modelling for building maintenance using mobile clients
Tongthong, Tanit Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system
Tongthong, Tanit Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality
Toshimi, Nakayama Preliminary inspection about the profit of 3D data in public works
Toz, Gonul GIS based decision support system for health and safety management in linear projects
Tsai, Meng-Han Experiences using building information modeling for a construction project
Tsai, Yichang (James) A parallelized image polygon detection algorithm for road sign inventory
Tsai, Yichang (James) Simulating port logistics operations using 3D visualization technology
Tsai, Yichang (James) Developing An Intelligent Sign Asset Inventory System Using Image Processing
Tsou, Jin-Yeu Re-entrant area studies using computational fluid dynamics
Tu, Wan-Ting Lessons learned from a collapsed wind turbine tower in Taiwan
Tumwesigye, Emmanuel Using artificial intelligence to deliver optimised energy consumption
Tumwesigye, Emmanuel Building performance analysis based on modelling and simulation
Turrin, Michela Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight
Turrin, Michela Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms
 

U         (top)

Uchida, Sayaka A study on effects of providing environmental information using three dimensional computer graphics
Udeaja, Chika Exploration of drivers and barriers to life cycle costing (LCC) in construction projects: professional quantity surveyors assessment
Ugaji, Motoki A building structural-performance monitoring system using RFID tag with sensors
Umare, Ketan A parallelized image polygon detection algorithm for road sign inventory
Underwood, Jason A non-parametric algorithm for computing information technology induced productivity in the construction value chain
Underwood, Jason Strategic positioning of IT in construction: the way forward
Usher, Colin The key performance indicators of the BIM implementation process
 

V         (top)

van Berlo, Léon IFC-based clash detection for the open-source BIMserver
Van Den Ham, Eric Integrated design of a large span roof: a parametric investigation on structural morphology, thermal comfort and daylight
van den Helm, Pim IFC-based clash detection for the open-source BIMserver
van Hal, Anke Description of a methodology for decision support for energy efficient housing redesign
Varughese, Jinu People flow modelling in building design
Vatani Oskouei, Asghar Optimization of seismic behavior of steel frames with semi-rigid connection using genetic algorithm
Vinagre, João Impact of the Eurocode 2 proposals for nonlinear analysis on lateral deformability and design of R.C. structures
Volkov, Andrey General information models of intelligent building control systems
von Buelow, Peter Structural morphologies and sun transmittance control: integrated parametric design using genetic algorithms
 

W         (top)

Wakefield, Ronald A decision support tool for subcontractor multi-project resource allocation
Wang, Bingjian Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
Wang, Congjun Performance analysis and design platform based on building information model
Wang, Congjun Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Wang, Guojian High-performance computing platform for architectural design
Wang, Guojian Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Wang, Guojian Performance analysis and design platform based on building information model
Wang, Juan Shakedown analysis of soil materials based on an incremental approach
Wang, Ting-Kwei A decision support tool for subcontractor multi-project resource allocation
Wang, Xiangyu A novel application in guiding assembly task: augmented reality animation
Wang, Xiaohong Free vibration of a magneto-electro-elastic toroidal shell
Wang, Yi Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
Wang, Zhiyu Pull-out behaviour of anchored blind-bolt: a component based approach
Wang, Zhiyu Modelling techniques of composite joints under cyclic loading
Watson, Alastair Digital buildings: facing the challenges
Watson, Alastair BIM – a driver for change
Way, James Practical software design for engineering application development
Wen, Zhen High-performance computing platform for architectural design
Whittaker, Terry Design of submarine pressure hulls to withstand buckling under external hydrostatic pressure
Whyte, Andrew Life-cycle costing analysis to assist design decisions: beyond 3D building information modelling
Williams, Bill Engaging learners inside and outside the classroom
Wilson, Nic Predicting the desired thermal comfort conditions for shared offices
Wimmer, Johannes 3D-Planning of construction site equipment based on process simulation
Won, Jongsung Identifying the consideration factors for successful BIM projects
Wu, Cheng-Hua Experiences using building information modeling for a construction project
Wu, Dapeng IFC & OpenGL-based representation and development of 3D realistic model in virtual construction
Wu, Po-yen System development and performance evaluation of track intrusion in Taipei MRT system
Wu, Wei Feasibility of integrating building information modeling and LEED® certification process
Wu, Yiching Simulating port logistics operations using 3D visualization technology
 

X         (top)

Xie, Haiyan Ultrasonic sensor + 4D virtual reality simulation environment for safety training
Xu, Zhen Smoke assessment of building fire based on FDS and GIS
Xue, Xiaolong The assessment of RFID facilitated construction material management system - a case study of water supply project
 

Y         (top)

Yabuki, Nobuyoshi Development of an integrated building and sensor data model with contextual data for data mining
Yabuki, Nobuyoshi Dynamic information support system for the process of prefabricated member installation using RFID technology and multi-agent system
Yabuki, Nobuyoshi Toward the improvement of safety planning for construction activities performed at high elevation by using augmented reality
Yabuki, Nobuyoshi Development of an accurate positioning method for augmented reality using multiple markers
Yamabe, Yuichiro Optimization system for facility placement in residential areas using multi-objective genetic algorithms
Yamabe, Yuichiro Optimal configuration of AMD for building structures using genetic algorithms – determination of optimization efficiency
Yamabe, Yuichiro A building structural-performance monitoring system using RFID tag with sensors
Yamamoto, Yuhei Research on method to extract advance notice of crimes from bulletin board systems for safety and security in community life
Yang, Keun-Hyeok Neural network modelling of reinforced concrete beam shear capacity
Yang, Youngjun Object oriented modelling of construction operations for schedule-cost integrated planning, based on BIM
Ye, Lieping A preliminary study on the application of computer simulation in the progressive collapse of bridges
Ye, Yinghua Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns
Ye, Yinghua Durability evaluation software system of concrete structure based on BIM and 4D technology
Ye, Yinghua Nonlinear RC beam element model under combined action of axial compression, bending and shear
Yin, Hang Building performance analysis based on modelling and simulation
Yin, Hang Integration of radio frequency identification and building information modelling for decentralised information management
Yitmen, Ibrahim An artificial neural network model for estimating the influence of change orders on project performance and dispute resolution
Yoon, You-Sang Similarity measurement method of case-based reasoning for conceptual cost estimation
Yoshida, Yoshihiro Development of an integrated building and sensor data model with contextual data for data mining
Yu, Fangqiang IFC & OpenGL-based representation and development of 3D realistic model in virtual construction
Yu, Hai-Sui DEM simulation of cylindrical cavity expansion in granular material
Yu, Hai-Sui Shakedown analysis of soil materials based on an incremental approach
Yu, Yamei Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
Yuen, Terry Y P Effect of out-of-plane loading on in-plane behaviour of unreinforced infilled RC frames
Yuksel, Orhan A comparative study for layout planning of temporary construction facilities: optimization by using ant colony algorithms
Yun, Su-Ho Tag-Manager Based Document Management Prototype System of Building Material Information
 

Z         (top)

Zahran, El-Said An approach to represent air quality in 3D digital city models for air quality-related transport planning in urban areas
Zakikhani, Sepideh Design criteria of wireless sensors in structural health monitoring systems
Zhang, Cheng Feasibility of location tracking of construction resources using UWB for better productivity and safety
Zhang, Cheng Improving construction safety through real-time motion planning of cranes
Zhang, Hanyi A software platform for information conversion from IFC-based architectural model to PKPM structural model
Zhang, Jianping Development of a sub building information model for 4D structural safety analysis during construction
Zhang, Jianping Research on 4D virtual construction and dynamic management system based on BIM
Zhang, Jianping A research on coupling prediction model for multi-disaster
Zhang, Jianping IFC & OpenGL-based representation and development of 3D realistic model in virtual construction
Zhang, Jinquan Finite element simulation of the composite continuous box-girder bridge with corrugated steel webs by CBCW
Zhang, Jinquan The application of GQJS in construction control analysis of the continuous box-girder bridge with corrugated steel webs
Zhang, Le Web-based on-demand information extraction system for building information models
Zhang, Xin Performance analysis and design platform based on building information model
Zhang, Xin Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Zhang, Yongli A research on coupling prediction model for multi-disaster
Zhang, Yu A technique of modeling local variation of laterally loaded masonry wall panels
Zhang, Yu Web-enabled model-based CAD for design
Zhang, Yunpeng Nonlinear RC beam element model under combined action of axial compression, bending and shear
Zhang, Yunpeng Nonlinear element model and damage estimating model of RC structures with arbitrary cross-section columns
Zhao, An An integration framework of arch bridge modeling for testing analysis
Zhao, Jingsong Nonlinear FEM analysis of bearing capacity and sedimentation of single pile in multi-layered soils
Zhao, Yimin Analysis of torsion stiffness and eccentric-loading effect for cable-stayed bridge with large width-to-span ratio
Zheng, Ding yang A general finite strip for the analysis of folded plates
Zhou, Guangchun A technique of modeling local variation of laterally loaded masonry wall panels
Zhou, Wei Towards a holistic modeling framework for embodied carbon and waste in the building lifecycle
Zhou, Wei Measuring the embodied energy, waste, CO2 emissions, time and cost for building design and construction
Zhou, Yagang Simulations on cross-ties for vibration control of long span cable-stayed bridges
Zhu, Bo Role-based access to facilities lifecycle information on RFID tags
Zhu, Zhenhua Visual recognition and assessment of concrete crack properties
Zolotov, Vladislav Combined strategy for efficient collision detection in 4D planning applications
 		  

 
© 2010 The University of Nottingham       ISBN 978-1-907284-60-1
Editor: Dr Walid Tizani, The University of Nottingham, UK

Organising Committee co-chairs: Dr Michael Mawdesley &  Dr Walid Tizani, The University of Nottingham, UK